Author
|
Thread |
|
|
Sparky
Joined: 08 Dec 2003
Posts: 19083
Location: PDX1/24/18 5:33 PM |
SLX Colnago comes home to roost
Sold the Nago I had since 94 in 2014. Frame popped up on local Craigslist over the summer for $400.00, then $275.00. The ad got edited recently, $150.00. So after 3.5 years away, the prodigal Nago returns...
I never had it striped down this far to weigh it in the 20+ years I had it. But to my surprise, the 1984 SLX frame/fork and steel campy headset is 5.8 lb.
The chrome on the fork is the weakest link. So I plan to paint fork to match and get repro panel/decals. Stay tuned for a Spring time rebirth. ;)
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
Nick Payne
Joined: 10 Jan 2004
Posts: 2626
Location: Canberra, Australia1/29/18 2:17 PM |
If you really want a nice lightweight steel frame, the Cherubim Sticky comes in at 1.35kg (under 3lbs). Both TT and DT are 1" diameter.
http://www.cherubim.jp/bikes/sticky/index.html
Edit: very nice detail work on the frame, too:
Last edited by Nick Payne on 1/29/18 7:27 PM; edited 1 time in total
|
|
|
|
|
|
|
|
Sparky
Joined: 08 Dec 2003
Posts: 19083
Location: PDX1/29/18 2:48 PM |
I think it broke as soon as I looked at it...
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
greglepore
Joined: 10 Jan 2004
Posts: 1724
Location: SE Pa, USA1/29/18 5:30 PM |
Saroni, baby!
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
PLee
Joined: 08 Dec 2003
Posts: 3713
Location: Brooklyn, NY1/30/18 10:58 AM |
Man, I now need to take out my steel Tomassini and polish it up.
|
|
|
|
|
|
|
|
Sparky
Joined: 08 Dec 2003
Posts: 19083
Location: PDX1/30/18 11:19 AM |
"take out my steel Tomassini"
And show it off. ;)
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
Sparky
Joined: 08 Dec 2003
Posts: 19083
Location: PDX2/11/18 3:06 PM |
Greg's Anvil juiced me up a bit.
Spent some effort to clean chrome [not fork] and paint deeply to decide how recoverable the Nago is. Not unhappy so far, still need to hit the Chain stay with some semi-chrome.
I kind of don't want to make it so nice I won't ride it. As in total refinish. [$!?] So leaning cleaning up and redoing the previous touch ups I did years ago.
Once I mix a matched/faded Saroni batch of paint, I will use that for the drop fills and to just paint the fork to match. Refilling yellow in all the right places/engravings prior. Partial repainting further over chrome CS probably. Then clear over it all including new Panels and other decals. Shooting for a 90+% mostly orig aesthetic.
The paint is pretty good actually for 33 years old.
I ordered some re-pro vinyl Nago panels and SLX Tubing decal I trashed in the bike stand years ago not realizing it was not cleared over.
Will probably just toss on a 7800 Groupo, have two still from 11s upgrades. Unless I find a nice ERGO groupo at some point before/during/after. But 7800 is pretty light as groups go FWIW.
Image removed [now that it is a whole bike again.
Last edited by Sparky on 3/11/18 12:51 PM; edited 1 time in total
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
greglepore
Joined: 10 Jan 2004
Posts: 1724
Location: SE Pa, USA2/13/18 3:16 PM |
Looking better. Problem with vinyl decals is the amount of clear it takes to make things level, the Anvil took 18! coats.
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
dan emery
Joined: 11 Jan 2004
Posts: 6890
Location: Maine2/13/18 4:51 PM |
18 coats?
Dude, were you off your medication?
|
|
|
|
|
|
|
|
Sparky
Joined: 08 Dec 2003
Posts: 19083
Location: PDX2/13/18 5:15 PM |
"the Anvil took 18! coats"
Coats of what is my question?
I expect I'll use two part Urethane to seal down the vinyl repro panels, then use Nitro to re-clear and build/level. I actually have a lot of experience doing this with Electric guitar I build from scratch. And a filtered positive pressure spray booth I made in a corner of the shop.
Example of material glue down fill/level clear here:
And this got even more clear coats after the pre assemble state in this pic.
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
greglepore
Joined: 10 Jan 2004
Posts: 1724
Location: SE Pa, USA2/13/18 5:36 PM |
Not me bro Dan, I'd be happy to fax you a copy of Tom Kellog's invoice for the repaint though. Yay.
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
Sparky
Joined: 08 Dec 2003
Posts: 19083
Location: PDX2/13/18 6:24 PM |
"invoice for the repaint"
$675.00
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
Brian Nystrom
Joined: 26 Jan 2004
Posts: 5101
Location: Nashua, NH2/14/18 6:24 AM |
Why do you care if the decals are level?
It seems pretty pointless to pile on a bunch of paint to do so.
|
|
|
|
|
|
|
|
greglepore
Joined: 10 Jan 2004
Posts: 1724
Location: SE Pa, USA2/14/18 7:58 AM |
RE: 7800- still the Shimano pinnacle as far as I'm concerned. The exposed cables are funky, but every other solution to get the same light action has resulted in cable wear issues. My c40 came with 7800, and I was going to pull it off and put on 10 spd Campy, but after a few rides I sold the surplus Campy and decided to keep it.
Brian-if you saw the frame irl you'd get it, looks painted on as opposed to applied. Not sure if 18 was hyperbolic, but that's what he said :)
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
dan emery
Joined: 11 Jan 2004
Posts: 6890
Location: Maine2/14/18 8:19 AM |
decals
Places like CyclArt will make any decals they can't get. I've thought of having them restore my '83 Fat Chance with the ubercool original "cartoon" decals.
Dunno if that would be cheaper than 18 coats of clear coat (albeit not as shiny!)
|
|
|
|
|
|
|
|
Sparky
Joined: 08 Dec 2003
Posts: 19083
Location: PDX2/14/18 11:40 AM |
"7800- still the Shimano pinnacle "
I've yet to find any other shifers as buttery. Being I have two mint sets, I will have to decide. The Di2 has spoiled me back to no cables jutting out again.
My disc Strong has 10s indexed BarCons, total run under tape and shift perfectly.
"pile on a bunch of paint to do so."
I get that too. My first Strong I had no decals under the clear. I have updated the over the clear 'STRONG' to his newer style at a point. I didn't bother with the disc one, all cleared over.
The panels on the 85 Nago panels are applied over the paint, I am about to get the blow drier out. ;)
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
daddy-o
Joined: 12 Apr 2004
Posts: 3307
Location: Springfield2/15/18 9:34 AM |
Decals too
Turns out clear 'water decal' substrate for ink jet and UV printing is a thing. (New to me)
Not saying a desktop inkjet printed Raleigh red and yellow panel will hold up to very much direct sunlight, but 21st century vehicle advertising demonstrates the inks do exist.
Betting this is where Dan's CyclArt note comes in.
This is where I started: http://www.decalpaper.com/
(It's too bad in the video she used a pure white mug, but for a fleeting instant while she applies the decal, the substrate reveals to be clear.
Now how well will that mug hold up in a dish washer?)
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
Sparky
Joined: 08 Dec 2003
Posts: 19083
Location: PDX3/10/18 3:24 PM |
Nago cleaned up deep and rolling
I got one of those eBay forks Walter has used on a few bikes. Came damaged, so until I negotiated with the seller I did an interim install.
Looks like a clumsy laborer pushed it too far into the buffer wheel and the buffer hub hit it. So a few tiny spots the chrome is breached I will address. [He credited me back 50% last night].
Just made a honker spacer out of the cut off piece of steerer from the Green Strong Disk bike.
Interesting way to raise your bars. ;)
I did not have handlebar I want to put the 7800 STIs on handy, so stole bars off the SS and put a lone friction DT shifter to shift rear and Tubeless 7850 Wheel with Hutchinson tubeless tires.
Going for a ride here in a bit now that we are seeing a 60^ day, and even better tomorrow and Monday it looks like. Yum!
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
Sparky
Joined: 08 Dec 2003
Posts: 19083
Location: PDX3/10/18 8:50 PM |
25 mile jaunt, fun and a few compliments.
I forgot how the Geometry and SLX tubeset answer being pushed, it is made for that. I never thought this was flexy, and still don't ;)
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
walter
Joined: 11 Jan 2004
Posts: 4391
Location: metro-motown-area3/11/18 7:26 AM |
we gotta get you a 90-deg stem!
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
Sparky
Joined: 08 Dec 2003
Posts: 19083
Location: PDX3/11/18 10:41 AM |
I wanted to see who that offended first, or rather who might be vocal about it, ;)
I got something up my sleeve actually. And it does include a 90^ stem. Or a slight angle set to the up position.
So Walter et al may un-pucker that sphincter a little bit. Hopefully this is less objectionable until a final solution. ;) And the polished Titanium sure gets along with the chrome fork aesthetically.
6/4 Ti old school 'Specialized 1" Open Face Stem'. This is a new one for even me, I will call it a semi threadless setup. ;) The stack of the Ti stem is the spacer now, and it is clamped onto the steer tube as well.
Removed a lot of wonky looks, but not quite all of it. ;)\ What can I do if my back won't bend to the old position anymore, not ride my ample inventory of go fast bikes?
Should hold me off until I procure one of these in 90^ or flipable. Silver or Black could work.
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
walter
Joined: 11 Jan 2004
Posts: 4391
Location: metro-motown-area3/11/18 4:42 PM |
much better! ;-)
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
Sparky
Joined: 08 Dec 2003
Posts: 19083
Location: PDX3/11/18 6:08 PM |
Need shorter reach bars if I keep that stem on there.
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
Sparky
Joined: 08 Dec 2003
Posts: 19083
Location: PDX3/27/18 10:36 PM |
Got some parts today, just had to for the Victory. Off with the Shimano, on with the Campy. Just had to.
Chorus 11speed used group, Record brakes
Carbon Ergos
Chorus Carbon 50/34t 172.5mm crankset with Italian thread BB
Chorus front derailleur braze on
Chorus Carbon rear derailleur
Chorus 12/27 cassette with lock ring
Record Titanium brakes (dual pivot front, single pivot rear with brand new SWISSSTOP pads)
YBN SLA 11speed black chain with missing link.
Be selling the cassette and lock ring. Will be using 11s Shimano wheel/cassette.
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|
Sparky
Joined: 08 Dec 2003
Posts: 19083
Location: PDX3/28/18 3:37 PM |
Saronni Sono Buoni
Still need to do the crankset. The wheels I first tossed on have 28mm tires and a 32 cassette. To my amazement, it does the 32 without any noise even. Although with the 53 DA cranks/chainring the chain is too short. [came with parts]
Wheels pictured are 26mm tires and a 14-28 Juniors cassette. This works big/big, which I would never do anyway.
I will get the 34/50 cranks on tonight or tomorrow. But I wonder if the front DR braze on will allow for a low enough distance with the 50 chainring. I may have to put on 36/52 chainrings.
19.4 lb in these pics with 2 tubes in the seat bag, 6500 SPD pedals. This also surprised me a bit.
Tossed on 5800 36/52 crankset [same BB for 7800] while I await the 52 tooth chainring for the Chorus cranks. As I suspected, the braze on will not allow the front DR to go low enough for a 50 tooth chainring for comfort. Probably work, but NG as far I am concerned.
Last edited by Sparky on 3/30/18 7:25 PM; edited 1 time in total
|
|
![Send e-mail Send e-mail](templates/phpVB2/images/icon_email.gif) |
|
|
|
|
|