Author
|
Thread |
|
|
zeke
Joined: 12 Jan 2004
Posts: 516
Location: denver7/31/14 7:50 PM |
shifting problem and campy compatibility question
Wondering if someone can help with a shifting problem I've been having with my bike for too long.
When I stand out of the saddle, my bike shifts (slips?) up in gear. If I keep riding out of the saddle, it will keep shifting up 2-3 gears. It's annoying. I've changed the chain and the cassette with no change in the automatic shifting problem. People have suggested that the problem could be the shifter (Campy Chorus 10 speed, over 10 years old). Rebuilding the shifter is beyond me and I'm not sure I trust (or want to pay) a local shop with a rebuild.
Has anyone dealt with a similar problem? It looks like I could buy a new rear shifter online for ~$100-140. 1. Anyone think this would fix the problem? 2. Should all Campy 10 speed shifters be compatible with my existing components/derailleur? I would think that Campy 10 speed spacing = Campy 10 speed spacing. But maybe there's something else that could make it incompatible?
Thanks for the help!
|
|
|
|
|
|
|
|
ErikS
Joined: 19 May 2005
Posts: 8337
Location: Slowing boiling over in the steamy south, Global Warming is real7/31/14 7:54 PM |
Dude, that is the frame flexing. Check it for cracks if you have not gotten brute strong over the summer. Otherwise get a bike with a stiffer rear triangle. I had the problem with old Al Cannondales of all things. I could twist the BB on a 2.8 with ease. My Klein never did it and of course I can't twist my Cervelo (that thing has the stiffest rear triangle I have ever ridden, to a fault on rough roads)
|
|
|
|
|
|
|
|
dfcas
Joined: 11 Jan 2004
Posts: 2815
Location: hillbilly heaven7/31/14 7:54 PM |
I had this on my 9 speed ones, so I assume its the same with 10 speed. The g springs in the shifter need replaced. You can send them to dealers that do it a lot and get it back in a few days. There is a shop in Boulder Co that does tons of them.
|
|
|
|
|
|
|
|
Sparky
Joined: 08 Dec 2003
Posts: 19083
Location: PDX7/31/14 7:56 PM |
Out of the saddle holding the bars and not the ergos too? Or only when you are holding the ERGOS?
Make sure the shifter is not loose on the bar is my first thought. Also, the housing end in the shifter may not be seated, I hope it is something simple like these things.
If the ERGO dropped on the bar, when you pull up you may be slacking the cable or some such thing...
I think I would be unwrapping the tape and inspecting housing for fray or not being seated first.
Agree with checking for frame cracks, separation, loose BB/cranks...
|
|
|
|
|
|
|
|
zeke
Joined: 12 Jan 2004
Posts: 516
Location: denver7/31/14 9:08 PM |
quote:
Dude, that is the frame flexing. Check it for cracks if you have not gotten brute strong over the summer.
Ha! I wish it were newly found brute strength! Maybe newly found love handles. I'll definitely check the BB for cracks - I've done this in the past but not so recently.
Sparky - the shifting happens when I'm out of the saddle on the bars or on the ERGOS - I've made sure to try this without touching the ERGOs, and it still shifts.
I'll look around to see if someone local or far can do the rebuild. I hate to toss it and buy something new - but I'll be surprised if the rebuild is cheaper than the new Veloce shifters I've seen onine for $130ish...
|
|
|
|
|
|
|
|
|
Brian Nystrom
Joined: 26 Jan 2004
Posts: 5101
Location: Nashua, NH8/1/14 5:43 AM |
I've done the rebuild several times
It's not the easiest job in the world and it requires attention to detail, but it's not bad. You can find detailed instructions online which you can review to determine if it's something you want to attempt. Twelve bucks worth of springs is a lot better than buying new shifters! Worst case, you're not likely to damage anything and you send your shifter(s) to a shop in pieces.
I agree with checking the cables, too. Campy cable housings are notorious for fraying at the ends. The plastic cover shrinks over time, exposing the wires. If they're otherwise in good shape, you can just trim off the exposed wires and reinstall them. However, if the cables are several years old, your best bet is to replace them. Don't waste your money on Campy replacements, there are better options. SRAM sells cables that are made exclusively for them by Gore (you can't buy Gore brand cables anymore) and the Professionals are outstanding. For less money, Jagwire makes decent cable sets and there are several other options.
|
|
|
|
|
|
|
|
greglepore
Joined: 10 Jan 2004
Posts: 1724
Location: SE Pa, USA8/1/14 6:32 AM |
What Tom and Brian said. The shifter rebuild is tedious the first time, but having done many of them they're second nature now.
Any competent shop is capable of the task. Since you're pulling the cables anyway, replace them as well.
G springs are consumables. Parts are less then 20 bucks here.
The rear Veloce shifter should be 100% compatible, the front not so much, as it should be paired with the newer "QS" fd, and you lose the trim feature. Personally, I wouldn't consider this option.
|
|
|
|
|
|
|
|
Jesus Saves
Joined: 16 Jun 2005
Posts: 1150
Location: South of Heaven8/1/14 8:02 AM |
Agreed about cable replacement for any type of index shifters, Campy, Shimano, etc. Replacing them regularly will save a whole bunch of headache, time and money. Its cheap to do and you benefit by not having your shifting degraded with worn cables (and dirty cable housing).
|
|
|
|
|
|
|
|
JohnC
Joined: 10 Jan 2004
Posts: 1939
Location: Glastonbury, Ct8/1/14 9:29 AM |
10 years and never rebuilt? G-springs. Classic symptom. Get 'em overhauled (and get new cables and housings). If you can do it yourself (I've done it 3 times on a 15-year-old Athena lever) it's a cheap deal for the parts, but even if you have to pay 50 bucks for labor it's worth it. They'll work like new.
|
|
|
|
|
|
|
|
walter
Joined: 11 Jan 2004
Posts: 4391
Location: metro-motown-area8/1/14 2:17 PM |
consider yourself lucky
i had g-springs go flaccid after 2 seasons on my first 8spd ergos in the late '90s.
|
|
|
|
|
|
|
|
KerryIrons
Joined: 12 Jan 2004
Posts: 3236
Location: Midland, MI8/1/14 6:55 PM |
G springs again
Agree that it is G springs, and that the fix is not that tough either as a DIY or for any good shop to do.
Frame flex would result in one gear shift, and then it would probably shift back. What is happening to you is shift after shift after shift, so that says the shifter is letting cable out. No need to replace the derailleur or the shifters.
|
|
|
|
|
|
|
|
Campyman
Joined: 14 Mar 2004
Posts: 52
Location: Wausau, WI8/4/14 7:21 AM |
Campy Levers Rebuild
These is a great shop up in Boulder that I sent my levers to a few years ago to rebuild. It is called Vecchio's. fantastic old school shop. Stopped there this past January while at CX Nationals.
They are located on Pearl St, here is the link to their website -
http://www.vecchios.com/
I think they charged about $50 plus parts.
The rebuild isn't hard, I've done them in the past. Just didn't have the time when they needed to be redone.
|
|
|
|
|
|
|
|
walter
Joined: 11 Jan 2004
Posts: 4391
Location: metro-motown-area8/4/14 8:49 AM |
rebuild @ vecchios ends up more like $100
but the work is well executed.
|
|
|
|
|
|
|
|
zeke
Joined: 12 Jan 2004
Posts: 516
Location: denver8/4/14 10:09 AM |
Thanks for all the input!
I think I'll look for a local shop to try for the rebuild. If I were still in Denver, I'd drive them up to Vechios - but we're in Rochester, NY now. Tom Price, any good shop recommendations? I called one local shop (Towpath) that said they don't do the rebuild but could ship it out to have it done. But another shop (Full Moon Vista) estimated they could do it for ~$50 plus parts.
|
|
|
|
|
|
|
|
Tom Price
Joined: 11 Jan 2004
Posts: 505
Location: Rochester, NY8/4/14 2:45 PM |
Pedallers Bike Shop
Hi Zeke, I did not realize that you are in Rochester. The shop I use is Pedallers (334-1083). Ask for Bob or Steve. When I raced they sponsored our team. They will take good care of you. The techs there are mature and experienced and will have no problem with the rebuild. I do all my own work but they did my shifter there. I had visions of chasing little springs around the basement for 3 days and did not even attempt that one. If you call them say Hi to them for me!
Also if you are into different kinds of beer stop into Beers of the World a few doors south. This is a unique beer only store with 1500 different beers on the shelf. You can mix your own case or six pack to take home. Let me know if you want to get together for a ride after your shifter is fixed.
|
|
|
|
|
|
|
|
dan emery
Joined: 11 Jan 2004
Posts: 6890
Location: Maine8/4/14 3:50 PM |
Ship out the rebuild?
That's not a real bike shop, right? A rental business or something?
|
|
|
|
|
|
|
|
April
Joined: 13 Dec 2003
Posts: 6593
Location: Westchester/NYC8/4/14 8:50 PM |
quote:
10 years and never rebuilt? G-springs. Classic symptom.
I must be pretty lucky. Hope I don't jinx myself. My Veloci shifter is from 1996! So far so good.
My local shop suggest I get the derailleur rebuild instead. They say there's excess play in the pulley arms. (which definitely has play, just not sure how much is "excessive")
Shifter still shifts and holds at whatever gear I wish. But the indexing is not as crisp as before. And I do notice it's getting progressively harder to keep them in proper working order.
|
|
|
|
|
|
|
|
Tom Price
Joined: 11 Jan 2004
Posts: 505
Location: Rochester, NY8/5/14 7:35 AM |
Towpath Bikes - Good Shop
Towpath is a good bike shop but high end or Campy equipped bikes are not a major part of their business. The shop is on the Erie Canal bikepath so the bikepath type of rider is the major part of their business. Every shop has it's own personality. I have stopped in a few times and have found them very helpful.
|
|
|
|
|
|
|
|
dddd
Joined: 11 Jan 2004
Posts: 3345
Location: NorCal8/5/14 12:02 PM |
fwiw, the price here in CA is $45 per lever.
I've done a few, and it's very straightforward.
Having to replace a cracked Ergolever body is one common reason to do a rebuild.
The bodies are cheap, except for the Record version with it's ball bearings, you have to buy the whole lever assembly minus the brake lever and hood. This lever "sub-assembly" then is a hundred dollars, but with all-new internals.
BTW, the G-springs are not the only springs that can fail in these levers, but are the most frequent failure in my experience.
I suppose the rate of G-spring failure is strictly proportional to the frequency of shifting.
The return spring lifespan likely are perhaps more affected by the lever throw, i.e. how many clicks that one does in a single throw.
|
|
|
|
|
|
|
|