Author
|
Thread |
|
|
greglepore
Joined: 10 Jan 2004
Posts: 1724
Location: SE Pa, USA5/6/13 6:41 PM |
Parts request
Way back-maybe around 2000 or so, I swapped a member here a pair of pointy hood Campy levers for the then new 10 spd round hood ones-and swapped the 9 spd cog into the round hood levers in exchange for putting the 10 spd into the pointy ones (right Bill?).
Now its 2013 and I have mostly 10 spd stuff (pride myself on being a generation behind). I need a 10 spd campy cam/gear or a trashed right side Campy lever. Willing to pay current ebay pricing or whatever is fair. Have 2 9 spd cams to trade, or can work out some sort of swap for a pair of Record Ti pointy hood 9 spd ergos....
Just fishing
|
|
|
|
|
|
|
|
Yammie
Joined: 11 Dec 2003
Posts: 440
Location: Tampa Bay, FL5/9/13 12:38 PM |
Branford
Greg, if they're still operational (and I think they are), try Branford Bike for all the miscellaneous pieces/parts and even manuals for this overhaul.
|
|
|
|
|
|
|
|
greglepore
Joined: 10 Jan 2004
Posts: 1724
Location: SE Pa, USA5/9/13 2:32 PM |
No longer-they're there, but have cut back on the parts...
Will likely just buy a trashed ebay lever. Funny, the gear has a "10" on it, but only shifts nine...
|
|
|
|
|
|
|
|
Dave B
Joined: 10 Jan 2004
Posts: 4511
Location: Pittsburgh, PA5/9/13 2:51 PM |
quote:
Funny, the gear has a "10" on it, but only shifts nine...
I'm sure you're aware of this so don't be offended by my asking but does it shift only nine gears (8 clicks) or does it have 9 clicks for 10-gears?
|
|
|
|
|
|
|
|
Sparky
Joined: 08 Dec 2003
Posts: 19083
Location: PDX5/9/13 4:24 PM |
Waiting for the 'DOH!'....
|
|
|
|
|
|
|
|
greglepore
Joined: 10 Jan 2004
Posts: 1724
Location: SE Pa, USA5/9/13 6:02 PM |
no doh...I meant that.I'm wondering about the front rachet, the one under the blade, which I don't recall changing but which the online guides say needs to be changed to go to 10.
This is a can o worm thing. Thinking I'll buy a trashed Chorus or Veloce lever and just transfer the paddle and brake lever over, its the only thing different, and I'll do g springs and carrier while I'm in there.
Or just leave it 9 spd, the only reason I was doing this was to make my Powertap wheel usable on this bike without a cassette swap, and who am I kidding, I'm 53 and not hitting tilt on the wattmeter.
|
|
|
|
|
|
|
|
|